CCNA辅导　EIGRP实验真题详解思科认证

文章作者 100test 发表时间 2009:07:08 02:48:30
来源 100Test.Com百考试题网

　　LAB: EIGRP
　　Question#
　　After adding RTR_2 router, no routing 0updates are being exchanged between RTR_1 and the new location. All other inter connectivity and internet access for the existing locations of the company are working properly.

　　The task is to identify the fault(s) and correct the router configuration to provide full connectivity between the routers.
　　Access to the router CLI can be gained by clicking on the appropriate host.
　　All passwords on all routers are cisco .
　　IP addresses are listed in the chart below.

　　RTR_A#show run
　　!
　　!
　　interface FastEthernet0/0
　　ip address 192.168.60.97 255.255.255.240
　　!
　　interface FastEthernet0/1
　　ip address 192.168.60.113 255.255.255.240
　　!
　　interface Serial0/0
　　ip address 192.168.36.14 255.255.255.252
　　clockrate 64000
　　!
　　router eigrp 212
　　network 192.168.36.0
　　network 192.168.60.0
　　no auto-summary
　　!
　　RTR_A#show ip route
　　192.168.36.0/30 is subnetted, 1 subnets
　　C 192.168.36.12 is directly connected, Serial 0/0
　　192.168.60.0/24 is variably subnetted, 5 subnets, 2 masks
　　C 192.168.60.96/28 is directly connected, FastEthernet0/0
　　C 192.168.60.112/28 is directly connected, FastEthernet0/1
　　D 192.168.60.128/28 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial 0/0
　　D 192.168.60.144/28 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial 0/0
　　D 192.168.60.24/30 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial 0/0
　　D* 198.0.18.0 [ 90/21026560 ] via 192.168.36.13, 00:00:57, Serial 0/0