思科CCNA考试截屏题库（四）Cisco认证考试

文章作者 100test 发表时间 2009:04:30 00:38:32
来源 100Test.Com百考试题网

11.Which of the following are VLAN frame encapsulation types that may be configured on a Catalyst switch? (Choose two.)

A:VTP

B:ISL

C:CDP

D:802.1Q

E:802.1p

F:LLC

Correct Answers: B, D

12.Which sequence of actions will allow telneting from a users PC to a router using TCP/IP?

A: Connect the PCs COM port to the routers console port using a straight-through cable.

B: Connect the PCs COM port to the routers console port using a crossover cable.

C: Connect the PCs COM port to the routers Ethernet port using a straight-through cable.

D: Connect the PCs ethernet port to the routers Ethernet port using a crossover cable.

E: Connect the PCs Ethernet port to the routers Ethernet port using a rollover cable.

F: Connect the PCs Ethernet port to the routers Ethernet port using a straight-through cable.

Correct Answers: D

13.Which of the following IP addresses can be assigned to host devices? (Choose two.)

A:205.7.8.32/27

B:191.168.10.2/23

C:127.0.0.1

D:224.0.0.10

E:203.123.45.47/28

F:10.10.0.0/13

Correct Answers: B, F

14.On point-to-point networks, OSPF hello packets are addressed to which address?

A: 127.0.0.1

B: 172.16.0.1

C: 192.168.0.5

D: 223.0.0.1

E: 224.0.0.5

F: 254.255.255.255

Correct Answers: E

15.Which command is required to apply an access list on a virtual terminal line of a router?

A: Router(config-line)# access-class 10 in

B: Router(config-if)# ip access-class 23 out

C: Router(config-line)# access-group 15 out

D: Router(config-if)# ip access-group 110 in

E: Router(config-line)# access-list 150 in

F: Router(config-if)# ip access-list 128 out

Correct Answers: A