文章作者 100test 发表时间 2007:05:18 11:09:04
来源 100Test.Com百考试题网
person one: I chose SNMP again, other choices, Performance monitor, proto My ans. WINS server. My ans. workgroup name, share name, domain name. I left computer name out. Proposed: 2 T1. My ans. Satisfy required but not optional. I don t know about this one. I chose D.
1) Connection-oriented protocol. choose 2
My ans. TCP, SPX
2) Connectionless-oriented Protocol. choose2
My ans. UDP, IPX(not sure)
3) If T1 line fails, what method of redundancy is used for email purposes.
My ans. ISDN (not sure either), choices are T3, ATM, CO3?, ISDN, X.25
4) Dial up protocol, 5yrs old computer, cannot use auto IP addressing.
My ans. SLIP
5) Dial up protocol. choose all that apply, there are only 2 0selections, PPP SLIP,
My ans. both
6) What network tool is used to monitor activities on hubs, routers, bridges, etc.
My answ. SNMP not sure, other choices are Performance Monitor, Protocol analyzer.
7) Almost similar to above question, Using Windows 95, want to monitor network through the
router (not the same wordings).
analyzer.
8) This one is tricky, I don t remember the question but the choices are NDIS 2.0, NDIS 3.0,
NDIS 3.1, ODI. Just know if these versions are valid.
9) Using Win NT station, small groups, administering their own resources, only one need to
share her resources, what security implementation?
My answ. user-level sec., sometimes I doubt this answ and could use share-level but I thought
share level is not an option in NT.
10) Using NWLink, cannot talk to the network.
My ans. client using inc. frame type
11) Can connect using IP address, but having problem using server s name. Whre do you start
troubleshooting.
12) This one, the question was vague, something about NETBIOS and not use same name and not
causing problem (something like that) choose 3.
13) Using a backbone between floors.
My ans. 10Base5
14) High level protocol for NETbios to handle file sharing. A lot of choices for this.
My ans. SMB
15) Scenario: connect 2 branch office with 1 main office 20 miles.
Proposed: use 10Base5. Does not satisfy required.
16) Connect 3 cities at least 1Mbps., Opt: must continue to comm. if one link fails.
17) Must reduce network utilization by 50%. Proposed: Something about increasing/decreasing
windows of TCP/IP....
18) Something about dragging the devices picture to the drawing, says "0drop here". It s weird.
The question was your network has no communication because you haven t completely connected
the connectivity devices. Choices are repeaters, bridge, hubs, routers. It has Ethernet, token ring.