CCIE实验室考试指南(5)

文章作者 100test 发表时间 2007:03:14 13:16:21
来源 100Test.Com百考试题网

Lab 05 -
Frame Relay and Appletalk Tunneling (Cayman)
Given: The following diagram
Configure Router_B as a frame relay switch. Configure Appletalk with
Cayman Tunneling.

此主题相关图片如下：

Solution:
Router_C
Router_C#sh run
Building configuration...
Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname Router_C
!
enable secret 5 ...
$1$jCQH$nzkHW6lQ9ywoAX87xsp9p1
enable password ccnaprep
!
appletalk routing
ipx routing 0060.09c3.df60
!
interface Loopback0
ip address 172.17.10.1 255.255.255.0
!
interface Tunnel0
no ip address tunnel source Serial0
tunnel destination 172.16.10.1
tunnel mode cayman
!
interface Ethernet0
no ip address
appletalk cable-range 140-149 148.178
appletalk zone left
!
interface Ethernet1
no ip address
shutdown
!
interface Serial0
ip address 172.16.10.2 255.255.255.0
encapsulation frame-relay
no fair-queue
cdp enable frame-relay lmi-type cisco
!
interface Serial1
no ip address
shutdown
!
no ip classless
!
line con 0
line aux 0
line vty 0 4
password sailing
login
!
end
Router_C#sh app route
Codes: R - RTMP derived, E - EIGRP derived, ...
C - connected, A - AURP
S - static P - proxy
2 routes in internet
The first zone listed for each entry is its ...
default (primary) zone.
C Net 140-149 directly connected, Ethernet0, ...
zone left
R Net 150-159 [1/G] via 0.0, 4 sec, Tunnel0, ...
zone right
Router_B
version 11.3
no service password-encryption
!
hostname Router_B
!
enable secret 5 ...
$1$eZ3D$vnTjKaCLtbSCcMF1mGzZm0
enable password cnaprep
!
ip host a 210.7.93.1
ip host router_a 210.7.93.1
ip host router_c 65.62.245.2
frame-relay switching
isdn switch-type ntt
!
interface Serial0
no ip address
no ip mroute-cache
shutdown
no fair-queue
clockrate 4000000
!
interface Serial1
ip address 65.62.245.3 255.255.255.0
encapsulation frame-relay
no ip mroute-cache
keepalive 15
clockrate 2000000
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 100 interface Serial2 ...
200
!
interface Serial2
ip address 65.62.245.4 255.255.255.0
encapsulation frame-relay
no ip mroute-cache
keepalive 15
clockrate 115200
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 200 interface Serial1 ...
100
!
interface Serial3
no ip address
no ip mroute-cache
shutdown
no cdp enable
!
interface TokenRing0
no ip address
no ip mroute-cache
shutdown
no cdp enable
!
interface BRI0
no ip address
no ip mroute-cache
shutdown
no cdp enable
!
ip classless
!
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
password ccieprep
login
!
end
Router_A
Router_A#sh run
Building configuration...
Current configuration:
!
version 11.3
no service password-encryption
!
hostname Router_A
!
enable secret 5 ...
$1$.s1R$iaEqZxLnYJo2QlZi8UNaO0
enable password ccnaprep
appletalk routing
ipx routing 0010.7b15.bd41
!
interface Loopback0
ip address 172.17.10.2 255.255.255.0
!
interface Tunnel0
no ip address
tunnel source Serial0/0
tunnel destination 172.16.10.2
tunnel mode cayman
!
interface Ethernet0/0
ip address 172.18.10.2 255.255.255.0
no ip mroute-cache
appletalk cable-range 150-159 ...
152.202
appletalk zone right
no cdp enable
!
interface Serial0/0
ip address 172.16.10.1 255.255.255.0
encapsulation frame-relay
no ip mroute-cache
cdp enable
frame-relay lmi-type cisco
!
interface TokenRing0/0
no ip address
no ip mroute-cache
shutdown
ring-speed 16
no cdp enable
!
interface FastEthernet1/0
no ip address
no ip mroute-cache
shutdown
no cdp enable
!
ip classless
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
password ccieprep
login
!
end
Router_A#sh app route
Codes: R - RTMP derived, E - EIGRP derived, ...
C - connected, A - AURP
S - static P - proxy
2 routes in internet
The first zone listed for each entry is its ...
default (primary) zone.
R Net 140-149 [1/G] via 0.0, 7 sec, Tunnel0, ...
zone left
C Net 150-159 directly connected, ...
Ethernet0/0, zone right
Notice that, when using Cayman tunneling, you must not configure
the tunnel with an AppleTalk network address.
When configuring GRE-IP, an Appletalk address must be used.